Smart Filtration Equipment Swimming Pool Controller With UV
Chlorinator And Controller
Description:
Swimming pool SPA water treatment unit adopts advanced automation
equipment, in the form of room configuration requirements for
assembly unit, save the site installation, material loss and room
management fees, for customers with the best combination to solve
family swimming pool, SPA pool, water treatment scheme.
* using sand cylinder filter, configure automatic control multi-way
valve, can be controlled by means of pressure and time setting,
changed the traditional manual control way of filtering, save time
and effort
* with advanced disinfection system, as long as join the right
amount of salt in the water, can make salt chlorine generator
automatic chlorine disinfection, reduce the cost of traditional
chemical disinfection and drug management; Low pressure UV
sterilization to further improve the water sterilization effect, to
ensure water quality, pollution-free, safe environmental protection
* configure automatic remote control electric control system, the
user can remote control, easy and convenient
Note:
The sand cylinder can be selected according to customer demand
acrylic cylinder cylinder or fiberglass sand sand
This equipment can according to customer request special selection,
order.
| power | flow rate | filtration area | pool volumn | running noice |
| 1.0HP | 7m3/h | 0.14m 2 | 40-60m 3 | ≤50dB |
| 1.2HP | 11m3/h | 0.20m 2 | 60-80m 3 | ≤50dB |
| 1.5HP | 18.5m3/h | 0.40m 2 | 110-140m 3 | ≤50dB |
Including:
* High quality side mount sand filter - high rate tanks are built
to be tougher, longer lasting and better performing, with automatic
multiport valve - innovated in the patterrn of the past manual
control, applying the advanced microcomputer technique and the
principle of pressure control and time control, linked with the
automatic ball valve, automatically complete the work of wash and
backwash.
* Double water disinfect - salt-water chlorinator and UV lamps, no
need to add any chloriine.
* Remote control system - easy to operate, you can control the
pump, the chlorinator, and the UV lamps even when you are swimming!
INSTALLATION:
1. Clear away any debris from the installation area, and make a
datum mark before installation.
2. Place the unit in a proper position according to the
installation detail drawing. Adjust the unit with a level to make
sure the tolerance is less than 2mm, use the filter pieces to pack
the unit level, fix the packing pieces, then fill in th vacant area
with grout.
3. Connect drainpipe and cable pipe as shown in the installation
detail drawing. The control box must be damp proofed. Electrical
installtion and testing must be done by a licensed or certified
electrician.
4. Fill in the joint between the unit and pool wall with grout when
installing, and seal with sealant.
5. After installation, fill with sand around the unit body. Spread
stones on the side of pool to match the pool structure, record the
installation notes.
